舰载机变长度减振牵制装置动力学分析

舰载机弹射起飞过程中,由于牵制载荷突卸而产生的前起落架沿航向的快速振动对机体结构和设备都会带来严重的疲劳问题。本文建立了舰载机弹射起飞动力学模型,设计了具有减振功能的舰载机弹射起飞变长度牵制装置,分析了该装置的动力学特性,并对该装置的减振效果进行了参数分析。研究结果表明:牵制载荷沿下扭力臂轴向的载荷分量所造成的缓冲器活塞杆的向后弯曲是导致牵制载荷突卸后前起落架振动的主要原因;变长度减振牵制装置通过实时改变牵制杆长度和牵制角,可大幅降低牵制载荷突卸后前起落架振动以及各铰接点振荡载荷,该装置在解决牵制载荷突卸振动问题中效果明显。     

逆轨拦截机动目标的三维最优制导律

以大气层内导弹逆轨拦截高速机动目标为背景，本文运用最优控制和双曲正切函数设计带角度约束的三维最优制导律。分别假设导弹弹道倾角和弹道偏角保持瞬时恒定，将三维制导分解为两个相互垂直平面内的二维制导。考虑导弹速度时变的情况，建立带角度约束的制导方程。设计一种双曲正切函数的变种，并将其设为脱靶量和角度约束的权重系数，根据极小值原理推导了最优制导律的解析表达式。双曲正切函数变种的引入，使得制导律对脱靶量和角度约束的要求是逐渐增强的，可以解决传统最优制导律初始段过载指令过大的问题。仿真结果表明了该制导律的有效性。     

Macrosegregation during crystal growth in horizontal bridgman boat

This paper is devoted to direct numerical simulation of the fluid flow and macrosegregation in horizontal Bridgman systems. Results concerning the fluid flows at Pr=0 and Pr=0.015 are given for various values of Gr and in situation where the melt-crystal interface is at rest. Practical laws concerning the behaviour of the mass transport and the level of inhomogeneity in the cavity are derived. The effects of some parameters such as Gr, Sc and the pulling speed on the concentration repartition in the two phases melt and crystal are studied and the average concentration in the crystal is shown for various situations.     

Numerical analysis for impacts of nozzle end-clearances on aerodynamic performance and forced response in a VNT turbine

It has been well known that nozzle end-clearances in a Variable Nozzle Turbine (VNT) are unfavorable for aerodynamic performance, especially at small openings, and efforts to further decrease size of the clearances are very hard due to thermal expansion. In this paper, both the different sizes of nozzle end-clearances and the various ratios of their distribution at the hub and shroud sides were modelled and investigated by performing 3D Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) simulations with a code of transferring the aerodynamic pressure from the CFD results to the FEA calculations. It was found that increasing the size of the nozzle end-clearances divided equally at the hub and shroud sides deteriorates turbine efficiency and turbine wheel reliability, yet increases turbine flow capacity. And, when the total nozzle end-clearances remain the same, varying nozzle end-clearances’ distribution at the hub and shroud sides not only shifts operation point of a VNT turbine, but also affects the turbine wheel vibration stress. Compared with nozzle hub clearance, the shroud clearance is more sensitive to both aerodynamic performance and reliability of a VNT turbine. Consequently, a possibility is put forward to improve VNT turbine efficiency meanwhile decrease vibration stress by optimizing nozzle end-clearances’ distribution.     

冷阴极电离真空计校准方法研究

主要介绍了冷阴极电离真空计结构、工作原理及冷阴极电离真空计的校准方法和校准装置,并对校准数据进行了处理。由于冷阴极电离真空计为非线性真空计,通过比较,校准结果采用了校准曲线的方式,可提高校准的准确度,减小校准不确定度,保证真空测量的可靠性。     

Stark widths of Ar III spectral lines in the atmospheres of subdwarf B stars

Using semiclassical perturbation approach in impact approximation, we have calculated Stark widths for 32 spectral lines of doubly charged argon (Ar III). Oscillator strengths are calculated using Hartree–Fock method with relativistic correction (HFR) and an atomic model including 17 configurations. Energy levels are taken from NIST database. For perturbing levels for which the corresponding energy does not exist in NIST database, the calculated energies are used. Our widths are compared with the experimental results. The results presented here are of interest for modelling and investigation of stellar atmospheres since argon in different ionization stages is observed in many astrophysical objects. Finally, the importance of Stark broadening mechanism is studied in the atmospheric conditions of sdB stars. Electron impact Stark widths are compared to thermal Doppler widths as a function of temperature and optical depth of atmospheric layers.     

星用第三代铼/铱材料490 N发动机研制进展

提高轨控发动机的真空比冲可以有效减少卫星变轨推进剂的消耗量,从而延长卫星的在轨工作寿命或增加有效载荷质量。介绍了我国在研的卫星用第三代铼/铱材料490 N发动机设计方案、技术攻关和试验情况,对工程化应用存在的问题进行了分析,并提出了改进和优化方案。在第二代490 N发动机的设计基础上,第三代490 N发动机成功攻克了可靠传热稳定工作喷注器、高性能喷注器与燃烧室匹配以及新型高温抗氧化材料制备等关键技术,真空比冲提高了10 s,达到325 s。两台发动机均通过了25 000 s鉴定级高空模拟热试车寿命考核,性能指标达到国际先进水平。但是针对试车子样数较少和铼/铱燃烧室制备工艺困难的问题,仍需进一步开展铼基体和铱涂层的高温性能研究,并继续优化发动机设计。     

基于双向流固耦合方法的柔性变结构喷管性能分析

为研究柔性变结构喷管的高度补偿潜力,本项研究利用ANSYS平台,基于双向流固耦合方法,对柔性变结构锥型喷管进行数值模拟,分析了飞行高度和柔性材料的弹性模量对喷管性能的影响。模拟结果表明,随着飞行高度的升高,柔性喷管变形加剧,喷管内部流场呈现出膨胀波-激波-膨胀波的波系特征,喷管柔性段的最大型面变形量和壁面最大应力逐渐增大。当材料弹性模量大于100 MPa时,喷管柔性段型面变形对流场的影响将可以忽略。研究显示,该柔性喷管的低空比冲显著高于传统喷管,高空比冲仅略低于传统喷管,其6 km设计高度下较传统喷管有1.462%的高度积分比冲增益。     

一种用于静态红外地球敏感器的高效算法

为提高微纳卫星的姿态检测效果，针对静态红外地球敏感器的全景鱼眼成像特点，以单张红外成像为研究对象建立成像模型，提出了间隔向量积与t Location-Scale分布置信区间均值结合的算法。将红外成像投影到空间球体上形成空间像点环；在像点环上间隔取点做向量积，得到当前目标姿态角的样本集合；通过t Location-Scale分布进行极大似然估计，得到目标姿态角样本均值和方差的估计量；再次计算1σ置信区间内样本均值，最终得到目标姿态角的估计值。相比于原算法，目标姿态角在±10°内的标准差由0.06°下降为0.03°，精度提高了50%。另外为避免迭代收敛的耗时问题，给出了应用于实际工程的查表法，使运算速度提高了87%，提升了静态红外地球敏感器的测量精度和效率。     

World Space Congress: a vision quest

The World Space Congress (WSC) in October, 2002, brought together luminaries, aerospace engineers, students, and scientists to discuss strategies for reviving the world's space agency. WSC lectures and plenary sessions focused on future research in space. Among topics discussed are the use of the Hubble Space Telescope to scan for habitable planets and obtain data about the beginning of the universe, new weather satellites, planetary protection from comets or asteroids, exploration and establishment of colonies on the Moon and Mars, medical advances, the role of space exploration in the world economy.